Skip to content

How To Remove Agitator From Kenmore Washer 90 Series

There is a video on this site that explains how to remove the agitator from a Kenmore washer 90 series. The agitator is held in place by four screws, which must be removed. Once the screws are removed, the agitator can be lifted out and replaced if necessary.

How To Remove Agitator From Kenmore Washer 90 Series

The agitator is the spinning disc inside a washing machine that helps to mix the water and the clothes. It can be removed from some washing machines, such as the Kenmore 90 series, by unscrewing it. Be sure to unplug the washing machine before removing the agitator.

-Phillips head screwdriver -flat head screwdriver -channel locks -pliers

  • To remove the agitator from a kenmore 90 series washer, first make sure the machine is unplugged and empty
  • Remove the two screws at the top of the agitator with a phillips head screwdriver

There are a few ways that you can remove the agitator from your Kenmore washer 90 series. One way is to use a screwdriver to remove the screws that hold the agitator in place. Another way is to use a wrench to loosen the bolt that holds the agitator in place.


Frequently Asked Questions

How Do I Remove The Agitator?

There is no one definitive answer to this question. Some tips on how to remove the agitator may include using a plunger, using a wrench, or using a socket tool.

How Do I Remove The Agitator On My Kenmore 80 Series?

The agitator on a Kenmore 80 series should be removed by unscrewing the four screws that hold it in place.

How Do You Remove The Agitator From A Kenmore Washing Machine?

To remove the agitator from a Kenmore washing machine, use a Phillips head screwdriver to unscrew the two screws at the base of the agitator. Once unscrewed, lift up the agitator and wipe down the shaft with a cloth to clean.

How Do You Take The Agitator Out Of A Kenmore Washing Machine?

The agitator on a Kenmore washing machine usually needs to be taken out and replaced if it becomes noisy or doesn’t spin as efficiently as it used to.

How Do You Remove The Agitator From A Kenmore 90 Series?

The agitator on a Kenmore 90 series can be removed by pulling it out from the bottom of the washer.

How Do You Remove An Agitator Base?

To remove an agitator base, the user must unscrew it from the pump. Afterwards, they must remove the impeller by using a wrench or a socket and pull it out.


Taking Everything Into Account

If the agitator on your Kenmore 90 series washer is not rotating, it may be broken. In this case, you’ll need to take it off and either fix or replace it.

Leave a Reply

Your email address will not be published.