Skip to content

How To Tighten Balisong Pivot Pins

There are a few ways to tighten balisong pivot pins. One way is to use a vise grip to hold the blade while you use a hammer to hit the pivot pin. This will usually work, but it can be dangerous if you’re not careful. Another way is to use a punch and a hammer. This is also a safe way to do it, but it takes some practice.

How To Tighten Balisong Pivot Pins

There is no one definitive answer to this question since it depends on the particular balisong pivot pin mechanism and how tight it needs to be tightened. However, some tips on how to tighten a balisong pivot pin effectively include using a wrench or other tool to tighten the bolt gradually until the pin has reached its desired tension, and occasionally checking the torque against a torque gauge to ensure that the amount of force being used is appropriate.

-a Phillips head screwdriver -an adjustable wrench -a pair of pliers -a hex key (if applicable)

  • Take off the balisong
  • Clockwise until it comes out remove the pivot pin put the pivot screw back in and tighten
  • Use a small allen wrench to loosen the pivot screw
  • Turn the screw counter

-If the pivot pin is too loose, it can swing around in the blade and cause it to malfunction. -If the pivot pin is too tight, it can prevent the blade from opening or closing properly. -To tighten a balisong pivot pin, use a pair of pliers or a wrench. First, loosen the screw by turning it counterclockwise with the pliers. Then, using the wrench, turn the screw clockwise until it’s snug against the blade

Frequently Asked Questions

What Do Zen Pins Do In A Balisong?

There is some debate on exactly what Zen pins do in a Balisong, but most believe they are used to hold the blade closed during use.

Why Is My Balisong So Loose?

There are a few potential causes for a loose Balisong. A common issue is that the hinge may not be tight enough, which can cause the blade to loosen over time. Additionally, if the blade is not properly sharpened or is excessively worn, it may also become loose. Finally, improper handling – such as bouncing the blade around constantly – can also cause it to become loose.

Why Is My Butterfly Knife Loose?

The knife may be loose due to improper assembly.

What Is Loctite Balisong?

Loctite Balisong is a type of knife that uses a balisong design. It is a folding knife that has two blades that hinge from the handle. The blades are attached by a pivot pin and can be opened with one hand.

Why Does My Butterfly Knife Keep Falling Apart?

The cause of your butterfly knife keeping falling apart could be many things such as improper storage, corrosion, and wear and tear. It is important to take care of your knife by properly storing it and never abusing it. Additionally, make sure to lubricate and clean any parts that may need it regularly. Finally, keep a close eye on the condition of your knife and make necessary repairs or replacements as needed.

How Much Should A Good Balisong Weigh?

There is no definitive answer since balisongs vary in weight and construction. Generally, a good balisong should weigh between 2 and 4 ounces.

Should You Loctite Balisong?

There is no definitive answer as to whether or not Loctite Balisong should be used. Ultimately, it comes down to personal preference. Some people feel that the balisong will stay closed better if it is glued, while others believe that a good quality balisong blade will not need the adhesive. Ultimately, the decision is up to the individual user.

Are Butterfly Knives Supposed To Be Sharp?

There is no right or wrong answer to this question since it depends on personal preference. Some people believe that butterfly knives should be sharpened because they can be used for cutting, while others believe that the flimsy blades are vulnerable to being damaged if not sharpened properly. Ultimately, it is up to the individual user to decide how sharp their butterfly knife should be.

What Screws Do Balisongs Use?

Bali-songs are knives typically used for slashing and chopping. They are typically composed of two pieces of metal that hinge along a central line. The blade is attached to the handle by means of screws or bolts.

What Are Zen Pins On Balisongs?

The most common Zen pins on balisongs are the pivot, blade, and handle pins. These pins hold the components of the knife together and allow for accurate and secure handling.

Why Does My Balisong Feel Loose?

There could be a few reasons why your Balisong feels loose. It could be that the blade is not tight enough against the pivot, or that the screws are not long enough. Additionally, if the blade is made from a softer metal, it may be more likely to loosen over time. In any case, either a tightening of the screws or a replacement of the blade will usually solve the problem.

Why Is My Balisong So Stiff?

There could be a few reasons why your balisong might be stiff. Perhaps it has been stored in a damp environment, or it has been improperly cared for in the past. In any case, you can help to improve its stiffness by ensuring that it is kept dry and free from dust and other contaminants. Additionally, you can use a lubricant to help reduce friction and make the blade easier to work.


There are a few ways to tighten balisong pivot pins. One way is to use a coin or screwdriver to turn them counterclockwise. Another way is to put a drop of oil on each pin and then use a q-tip or cotton bud to apply pressure and turn the screws in the opposite direction.

Leave a Reply

Your email address will not be published.