Skip to content

How To Use A Kenmore 385 Sewing Machine

The Kenmore 385 sewing machine is a basic, mechanical model that is easy to use. It has a straightforward control panel with only a few buttons. To sew, first make sure that the bobbin is loaded correctly and the thread is threaded through the needle. Adjust the stitch length and width as desired, then sew slowly on a scrap piece of fabric to make sure the stitches look correct.

How To Use A Kenmore 385 Sewing Machine

The Kenmore 385 sewing machine is a basic, mechanical model that is suitable for beginners. It has a number of features that make it easy to use, including an automatic needle threader, a built-in thread cutter, and a reverse stitch button. To sew with the Kenmore 385, first make sure that the bobbin is loaded with thread. Then, place the fabric to be sewn under the needle and press down on the foot pedal. The machine will automatically sew a straight

Sewing machine, thread, fabric, scissors, pins

  • Put needle in correct position lower the presser foot put thread through the eye of the needle pull the thread so that it is taut push
  • Thread the machine
  • Put fabric in machine

: – Before using the sewing machine, make sure that all the parts are properly assembled. – Check the bobbin to make sure it is properly threaded. – To sew, first make sure the presser foot is up. – Place the fabric under the presser foot and hold it taut. – Lower the presser foot and Sew slowly at first to make sure the stitches are even. – Increase speed as you become more comfortable with the machine.


Frequently Asked Questions

How Do I Thread My Kenmore 385 Sewing Machine?

Threading a Kenmore 385 sewing machine can be a little difficult, but not impossible. The basic steps are: hold the bobbin in your left hand and thread the needle in the right hand; insert the needle into the top of the bobbin case; lift up on the cover or lid of the bobbin case until it pops open; remove the old thread from the spool; rewind the new thread onto the spool; replace the cover or lid on the bobbin case.

Who Made Kenmore 385?

Kenmore 385 was made by Sears.

How Do You Use A Kenmore 385 Sewing Machine?

This sewing machine is popular for embroidery and quilting. It has a large variety of stitches and can be used for a variety of fabrics.

How Do I Thread A Kenmore 385 Sewing Machine?

Threading a Kenmore 385 sewing machine can be a daunting task, but with a little know-how and patience, the process can be easily completed. To thread the machine, begin by removing the bobbin case. Then remove the topthread spindle by depressing the button at the center of the front wheel and unscrewing it counterclockwise. Finally, remove the lower thread spindle by depressing the button and unscrewing it clockwise.

How Old Is A Kenmore 385 Sewing Machine?

The Kenmore 385 sewing machine was manufactured in 1984.


In Summary

Kenmore 385 sewing machine is a great choice for beginner seamstresses. It is easy to use and has a lot of features.

Leave a Reply

Your email address will not be published.